data sheet ptp fc series pt type alarm setter the fc series pt type alarm setter accepts one or two input signal, compares internal or external setting signal, and outputs alarm contact signals of upper limit or lower limit. its structure is plug-in style. input specification response time: less than 0.2 sec. dielectric strength: 1500v ac, 1 min. (input - output - power - ground) insulation resistance: 500v dc, 100m ? or over (input - output - power - ground) ambient temperature effect: less than 0.15% of full span/10 c power regulation effect: less than 0.15% of full span input signal: input for monitor 2 points (max.) input for external setting 2 points (max.) input type voltage current input signal 1 to 5v dc 4 to 20ma dc input resistance 1 m ? or over 250 ? alarm setting specification internal setting: by built-in trimmer resistor external setting: by external signal output specification output signal: 2 points (max.) output type: relay contact output contact capacity: 24v / 0.5a dc, 100v/ 0.4a ac 200v/ 0.2a ac or less (resistance load) power supply power supply: 24v dc (20 to 30v dc) 24v ac, +13%, ?0%,(47 to 63hz) 100v ac (85 to 132v ac / 47 to 63hz) 200v ac (187 to 264v ac / 47 to 63hz) as specified. power consumption: approx. 2w (at dc power) approx. 6va (at ac power) operation condition ambient temperature: 0 to 50 c ambient humidity: less than 90%rh (no condensation) outline dimension (hxwxd): 96 x 52 x 130mm mass: appox. 300g housing: plastic housing (color: black) mounting method: panel mounting or din rail mounting characteristics accuracy: less than 0.2% of full span reproducibility: less than 0.1% of full span hysteresis width: approx. 0.3% of full span specifications code symbols t pp 1 10 2 1 345678 9 description input signal 1 to 5v dc 4 to 20ma 2nd alarm specifications none (the 5th digit : 1) excitation on (upper limit alarm) excitation on (lower limit alarm) excitation off (upper limit alarm) excitation off (lower limit alarm) non- excitation on (upper limit alarm) non- excitation on (lower limit alarm) non- excitation off (upper limit alarm) non- excitation off (lower limit alarm) output signals 1 point 2 points alarm setting system internal setting external setting power supply 24v dc / 24v ac (50/60hz) 100v ac (50/60hz) 200v ac (50/60hz) 1st alarm specifications excitation on (upper limit alarm) excitation on (lower limit alarm) excitation off (upper limit alarm) excitation off (lower limit alarm) non- excitation on (upper limit alarm) non- excitation on (lower limit alarm) non- excitation off (upper limit alarm) non- excitation off (lower limit alarm) 1 2 1 2 a b 1 2 3 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8 date EDS9-26A feb. 20, 1996
ptp functional diagram internal setting external setting 11 12 21 22 13 14 23 24 32 31 42 41 44 34 43 power supply power supply circuit setting 1 setting 2 output 1 output 2 comparator 1 comparator 2 11 12 21 22 13 14 23 24 32 31 42 41 44 34 43 power supply power supply circuit monitor input 1 monitor input 2 monitor input 1 setting input 1 setting input 2 monitor input 2 output 1 output 2 comparator 1 comparator 2
external connection diagram outline diagram (unit: mm) range of delivery main unit and socket 130 100 52 48 294 74 terminal screw m4 main unit terminal screw m2.5 (for transmission) 35 terminal stopper din rail mounting 52 40 2-m4 stopper din rail panel mounting 11 12 21 22 5 6 31 32 41 42 43 44 33 34 23 24 14 13 + - output 1 output 2 power + - + - + - input 1 input 2 ext. sp1 ext. sp2 + -
ptp information in this catalog is subject to change without notice. printed in japan head office gate city ohsaki, east tower, 11-2, osaki 1-chome, shinagawa-ku, tokyo 141-0032, japan http://www.fesys.co.jp/eng instrumentation div. international sales dept. no.1, fuji-machi, hino-city, tokyo, 191-8502 japan phone: 81-42-585-6201, 6202 fax: 81-42-585-6187 http://www.fic-net.jp/eng caution on safety *before using this product, be sure to read its instruction manual in advance.
|
